If you are a homeowner who is looking to have a roof installation on your home, there are a few things you will need to know. These things include how to remove the old roof, how to install the new roof, and how to prevent the roof from deteriorating.
Remove the old roof -Things You Need to Know About Roof Installation
Before you can begin installing a new roof you need to tear off your old one. This may seem like a hassle but it will make it easier to install the new one. You’ll also be able to take a look under your roof to see if there are any issues that need fixing.
There are several factors that you need to consider before you can decide on how to remove your old roof. One of the most important is the weather. If it is raining you can run the risk of moisture damage to your home. Another consideration is the number of layers you have to deal with. The more layers you have, the harder it is to remove your old roof.
It’s always best to have a team of people around you when tearing off your old roof. Not only is it more fun to have others do the work for you, but it can be dangerous to try and go it alone.
Using the appropriate tools is essential.
For instance, a push broom can help you pick up debris from your roof’s edges. In addition, a broom magnet can help you find loose nails hidden in your grass.
A good rule of thumb is to wait five days after you have removed your old roof before you attempt to install a new one. After that, you should place a protective tarp over your new roof to avoid any possible water damage. Also, be sure to check with your local building inspector to see if you need a permit.
If you’re ready to replace your old roof, be sure to ask about the most efficient methods. Some homeowners choose to skip this step entirely, but it’s always a good idea to have your new roof installed the right way.
Install starter shingles -Things You Need to Know About Roof Installation
Starter shingles are the first course of shingles that are placed on a roof. They are a type of fiberglass-reinforced asphalt shingle, usually made from a generic rectangular shape. The back side of the shingle contains an adhesive strip, which bonds the shingle to the base. This strips prevents the shingle from lifting up in wind.
Before installing starter shingles, it’s important to know the size of your eave and rake edges. You’ll need to purchase starter shingles with enough overhang to cover these edges. In high-wind areas, you should also install starter strips along the edges of the roof, which will protect them from the winds.
To install the starter shingles, begin at the edge of the roof and follow the manufacturer’s installation guidelines for spacing overhangs. If you’re unsure of the proper overhang spacing, ask a roofing contractor.
Starter shingles should be installed with five nails per strip. Normally, a nail is placed approximately one and a half to three inches above the edge of the shingle. Using this method is recommended, as it ensures a tight bond between the shingles and the underlayment.
For a successful install, make sure to align the seal strip of the shingle with the top of the eave or rake. Alternatively, some people suggest flipping the shingles and placing the self-seal strip at the bottom. However, this method can lead to water penetration.
It’s also a good idea to use a ladder hoist when installing heavy starter shingles. This can help keep you from getting your fingers caught in the shingles.
Starter shingles are a vital part of the overall roof installation process. Properly installing them is crucial to ensuring a sturdy bond, and they provide wind protection at the eave and rake.
Install drip edge -Things You Need to Know About Roof Installation
Drip edge is a piece of metal that directs water away from the house and fascia. It prevents rain from running back onto the roof, which could cause damage to other components of the roof.
It can be installed as a do-it-yourself project, but it can be tricky. You need to be comfortable working on ladders and using safety equipment.
A drip edge is made of aluminum and can be purchased from home improvement retailers. Aluminum can be recycled for future use, which makes it more environmentally friendly. If you want to install a drip edge on your own, check the local building code.
The drip edge should be installed so that it extends over the ridge. This will prevent water from flowing into the shingles and under the joint between the shingles. Once the drip edge is in place, you can start installing new roofing materials.
Adding a drip edge can also extend the life of the fascia boards. During rainstorms, the edge of the drip edge directs the water into the gutters and away from the home. Without a drip edge, water can run down the fascia, rotting the wood.
Drip edge installation can be simple, but it is important that it be done right. Failure to do so can result in costly repairs or even structural damage. In addition, failing to install a drip edge can lead to fines.
There are several types of drip edges to choose from. Some of the most common are white and brown. Other options include black and accent colors. These colors can be used to add a pop of color to the home or to complement other areas of the home.
Install metal flashing -Things You Need to Know About Roof Installation
If you want to install metal flashing on your roof, you can do it yourself or hire a professional roofing contractor. A properly installed flashing will keep your home’s roof water-tight for a long time. This helps protect your investment and will prevent leaks for the life of the flashing.
There are two main types of metal flashing. One is the continuous flashing. The other is the step flashing. Continuous flashing is used to cover large joints on the roof, including the joints between siding and the roof. It is made from individual pieces of metal that are cut to size and fastened together.
For a long-lasting installation, you need to make sure you use a material that is flexible. Copper is a good choice for flashing because it is malleable and can be soldered easily. Steel is also a good choice, but you will have to pay more upfront.
Regardless of the type of metal you choose, you must be able to seal the flashing. If you have holes in your roof, you will find it difficult to keep water out.
Before installing any roof flashing, you should perform a water test. Water is tested over a pipe vent, for example. You should wait at least 15 minutes for the test to be complete. Once you see no signs of leaks, you are ready to continue.
In the case of leaks, you can use caulk or urethane-based caulk to fill in the hole. However, the use of silicone-based sealants can eat away at the paint on the metal panel.
Drip flashing is another option. These are installed in steps to help guide water away from the seams. Both drip flashing and step flashing can fail to prevent excess water from entering your home.
Prevent damage from heavy rainfall
If you’re looking to keep your home dry during a heavy rain, there are a few steps you can take. This includes checking and maintaining your gutters. You should be able to catch a few inches of water before it reaches your house. Similarly, you should be able to divert any water that does make it to your property.
While you’re at it, you should also get a proper drainage inspection. This is one of the best investments you can make, as it could save you a bundle down the road.
Keeping your gutters free of debris and directing them away from the foundation will ensure the rain water from your roof gets where it needs to go. Also, a good downspout can help drain the excess moisture from your home.
You should also make sure to keep your soffit vents clear of debris.
This is especially important if your home has a chimney. Having a sump pump is a great way to avoid flooding, but it should be checked regularly by a professional.
Finally, you should check out your skylight. A poorly sealed skylight can obstruct the passage of rainwater and sunlight, which can lead to mold. As well, if your house has a chimney, you’ll need to make sure the masonry is properly waterproofed.
Lastly, you should look at your insurance plan. Many insurance policies cover the most obvious weather related incidents, but you should be aware of “covered perils” as well. For example, many policies don’t cover damage resulting from water damage, so you should call your agent to see if you have coverage.
There is no foolproof way to prevent damage from heavy rainfall. However, if you take the necessary steps to prepare your property, you should be able to enjoy the benefits of a dry house come rain or shine.